Bluefin LED Piranha P6 Colour Change Underwater Boat Light Aluminium Base
Be The First To Review This Product!
Help other Suncity Motorcycles users shop smarter by writing reviews for products you have purchased.
Write A ReviewHelp other Suncity Motorcycles users shop smarter by writing reviews for products you have purchased.
Write A ReviewThe Piranha P6 colour-changing LED underwater light gives you the ability to showcase your boat in infinite colour choices. No costly external controllers required - just hook up to a simple On/Off toggle switch for easy colour selection, or select to Strobe, which is proven to attract fish. Producing 2700 fixture lumens, this light will help your boat stand out from the crowd in the marina, river or ocean, illuminating it in a rich array of colours that won’t fail to get your guests in the party mood.
How the P6 Colour-Changing light works:
With regard to the number of lights your boat needs to pack a colour punch, Bluefin recommends installing 1-5 lights from the Piranha range on the transom or side of centre-console and runabout boats. Recommended spacing between the lights is from 1.2m (3ft 11 inches) to 2m (6ft 6 inches). The Piranha P6 is suitable for all hull types on boats up to 14m (45ft) long.
The Piranha P6's circuit board is manufactured in copper ceramic. This material is chosen for its superior thermal performance, unlike many of Bluefin LED's competitors who use cheaper materials such as aluminium or fibreglass. This light is also incredibly easy to install with just one small cable-entry hole and 3 mounting screws, and is suitable for a wide range of boats.
Features:
If hosting a party on your boat isn’t your thing, underwater lights can be great for fishing at night where they not only make it easier to see fish in the water but also attract them to your boat! As well as producing a whole spectrum of colours, they can be strobed, dimmed or sequenced to move in time with music or in patterns programmed via a controller. Bluefin`s unique Precision Timing Technology (PTT) ensures continuous synchronisation of the the lights without the need of any costly external controllers.
Different colours penetrate the water to varying depths. Red light can’t be seen past 5m, orange disappears at 10m, yellow at 20m, green (one of the deepest) at 30m, but blue is by far the furthest at 50m. The human eye is sensitive to both green and blue shades so both colours stand out and are quite spectacular at night if you are looking for the fishing and party effect. Green is also a good colour in areas where the water clarity is poor. The green light will make the water appear cleaner and reflect less.
How your light appears in the water will vary slightly depending on factors such as the mineral content of the water your vessel is in, how deep it is, sea floor & sediment composition, water pollution, water clarity etc.
Note: Not for installation in chlorinated swimming pools - models designed for pools with special seals are available from the supplier. Please contact us for more info.
Mounting Type: : | Surface |
---|---|
Hole cut out size: | 15mm (Gland size: 13mm) |
Fixture Lumens: | 2700 |
Max Wattage: | 50 Watts |
Typical Life Expectancy: | 50,000 hours |
Voltage: | Multivolt 12V/24V |
Power Draw: | 4A @ 12V / 2A @ 24V |
Protection: | Over / Under Voltage, Over Current, Reverse Polarity protection, Active thermal protection and Hydro block technology |
Fixture Profile: | 17.6mm |
Fixture Diameter: | 110mm |
Lens Type: | 3mm optical-grade high impact polymer, Guard X Coating |
Fixture Material: | Aluminium |
Beam Angle: | 60 Degree |
Warranty: | 2 Year |
Type Approval: | RINA IEC 60529 |
Available Colours: | Full RGBW colour change, toggle-switch operation, colour scroll on startup PTT Technology ensures continuous synchronisation of all the lights |
Suitable Use: | Above & below the water-line |
Spacing: | 1.2 - 2.0m |
Driver Type: | Integral |
Total weight: | 500g |
Attached cable length: | 1.8m |
Included in box: | In-line fuse holder & rated fuse, gel connector, inline crimps, heat shrink, fixing screws, template and installation instructions |
Optional Accessories: (sold separately) | • Junction Box: 4-way IP68-rated wiring junction box • BL-Switch: Panel-mount illuminated switch & wiring loom • 220/110V Power Supply: Power supply 24V for up to 5 lights • I.Y.S Lighting Control: Control via MFD screen or mobile device |
SKU | JPW-JPW12313A |
Brand | Bluefin LED |
Accessories
(30)
Anchor & Mooring
(8)
Boat Seats
(1)
Cabin Hardware
(2)
Deck Hardware
(3)
Fishing Accessories
(1)
Rigging Hardware
(3)
Safety Equipment
(5)
Ventilation
(1)
Watersports
(6)
Accessories
(1)
Oils
(1)
Dirt Bike Accessories
(1)
Tie Downs
(1)
Electrical
(1)
Switches
(1)
RV Parts | Accessories
(1)
Fans
(1)
Street Bike Accessories
(1)
Tie Downs
(1)
Trailer
(1)
Tie Downs
(1)