$0.00
$0.00
$0.00
Help other Suncity Motorcycles users shop smarter by writing reviews for products you have purchased.
Write A ReviewThe Piranha P3 Underwater Light with Bronze Base is small yet ferociously powerful. Single colour, available in Diamond White, it delivers 1,600 fixture lumens with only 3 LEDs. This class-leading light will help your boat stand out from the crowd in the marina, river or ocean.
The light is controlled via a simple on/off toggle switch or via Bluefin’s IYS Control System for MFD/mobile devices. Its ultra-compact, low-profile design is perfect for all types of boats, and is suitable for both transom & side-mounting on all hull types on boats up to 7m (25ft) long. For boats longer than 7m (25ft) the Piranha P6 or Piranha P12 lights may be more suitable.
The P3 light is also incredibly easy to install with just one small cable-entry hole and 3 mounting screws, and is suitable for a wide range of boats. This model features a bronze base.
For the number of lights your boat needs to pack a colour punch, Bluefin recommends installing 1-5 lights from the Piranha range on the transom or side of centre-console and runabout boats. Recommended spacing between the lights is from 1.2m (3ft 11 inches) to 2m (6ft 6 inches).
This light offers amazing value for money and out-performs other comparably priced underwater lights.
Features:
If hosting a party on your boat isn’t your thing, underwater lights can be great for fishing at night where they not only make it easier to see fish in the water but also attract them to your boat! Different colours penetrate the water to varying depths. Red light can’t be seen past 5m, orange disappears at 10m, yellow at 20m, green (one of the deepest) at 30m, but blue is by far the furthest at 50m.
The human eye is sensitive to blue shades, so this colour stands out and is quite spectacular at night if you are looking for the fishing and party effect. If you usually boat in clear water, white LED lights are stunning at highlighting the beauty of the water.
How your light appears in the water will vary slightly depending on factors such as the mineral content of the water your vessel is in, how deep it is, sea floor & sediment composition, water pollution, water clarity etc.
Note: Not for installation in chlorinated swimming pools - models designed for pools with special seals are available from the supplier. Please contact us for more info.
| Mounting Type: : | Surface |
|---|---|
| Hole cut out size: | 15mm (Gland size: 13mm) |
| Maximum Lamp Lumens: | 2100 |
| Fixture Lumens: | 1600 |
| Max Wattage: | 20 Watts |
| Typical Life Expectancy: | 50,000 hours |
| Voltage: | 12V |
| Power Draw: | 1.2 Amps |
| Protection: | Over / Under Voltage, Over Current, Reverse Polarity protection, Active thermal protection and Hydro block technology |
| Fixture Profile: | 17.6mm |
| Fixture Diameter: | 95mm |
| Lens Type: | 3mm optical-grade high-impact polymer, Guard X Coating |
| Fixture Material: | AB2 Bronze (standard) |
| Beam Angle: | 60 Degree |
| Warranty: | 2 Year |
| Type Approval: | RINA IEC 60529 |
| Available Colours: | Diamond White 6500k |
| Suitable Use: | Below the water-line only |
| Spacing: | 1.2 - 2.0m |
| Driver Type: | Integral |
| Total weight: | 400g |
| Attached cable length: | 1.8m |
| Included in box: | In-line fuse holder & rated fuse, gel connector, inline crimps, heat shrink, fixing screws, template and installation instructions |
| Optional Accessories: (sold separately) | • Junction Box: 4-way IP68-rated Wiring Junction Box • BL-Switch: Panel-mount illuminated switch & wiring loom • I.Y.S Lighting Control: Control via MFD screen or mobile device |
| SKU | JPW-P-JPW12301 |
| Brand | Bluefin LED |
